SAML Support
Authentication Mode
Shows the authentication method that is used by the RADIUS protocol, such as Microsoft Challenge Handshake Authentication Protocol Version 2 (MS-CHAPv2), IEE 802.1x or dot1x, and so on.
Enter the RADIUS authentication port number. The valid range is from 1 to 65535. The default is 1812.
Authorization Mode
Enter the RADIUS authorization port number. The valid range is from 1 to 65535. The default is 1812.
The tooltip also displays the RADIUS Change of Authorization (CoA) port and type of URL redirect that is used by the device. These attributes are defined in the device type's network device profile.
Specify the port to be used for RADIUS CoA. The default CoA port for the device is defined in the network device profile that is configured for a network device (Administration > Network Resources > Network Device Profiles > Network Resources > Network Device Profiles). Click Set To Default to use the default CoA port.
If you modify the CoA port specified in the Network Devices window (Administration > Network Resources > Network Devices) under RADIUS Authentication Settings, make sure that you specify the same CoA port for the corresponding profile in the Network Device Profile window (Administration > Network Resources > Network Device Profiles).
Accounting Mode
When Cisco ISE is integrated with ASA, ensure that the Accounting mode is set to Single in ASA. Accounting data is sent to only one accounting server in Single mode. or Simultaneous mode.
The RADIUS Accounting report identifies how long users have been on the network. If users are losing network access, you can use this report to identify whether Cisco ISE is the cause of the network connectivity issues. Radius accounting interim updates are included in the RADIUS Accounting report if the interim updates contain information about the changes to the IPv4 or IPv6 addresses for the given sessions.
Enter the RADIUS accounting port number. The valid range is from 1 to 65535. The default is 1813.