Throughput Capacity is Less Than Expected
- Ensure that connectors are using DTLS and not TLS.
- Run diagnostics on the connector and look for Protocol in the output. For more information, see Connector Diagnostics (CLI) and Connector Troubleshooting Tools.
- If the protocol shows TLS, check the following:
- DTLS and TLS connections must originate from the same IP address.
- The egress firewall must allow UDP connections on port 443.
- The connector is the required instance type. For more information, see Requirements and Prerequisites for Resource Connectors and Connector Groups.
- In the connector instance, Auto-Assign Public IP must be enabled.
- If you make changes, reboot the instance.