Network Performance with NPCAP
It is observed that Network performance will be affected when Windows TetSensor service is running. Windows Tet- Sensor service (tetsen.exe) captures the network flows using NPCAP. NPCAP implementation to capture the network flows and the network flows to the tetsen.exe affects the network performance.
Compare the Network Performance after installing tetsensor, Client : Windows 2016
NPCAP 1.55
TetSensor Config : Conversation Mode with Enforcement mode WFP
Server : Windows 2016
NPCAP 1.55
TetSensor Config : Conversation Mode with Enforcement mode WFP
Run cmd : iperf3.exe -c <server_ip> -t 40
|
Setup |
Network Performance |
|---|---|
|
No TetSensor Installed NO NPCAP |
[ ID] Interval Transfer Bandwidth [ 4] 0.00-40.00 sec 18.2 GBytes 3.90 Gbits/sec sender [ 4] 0.00-40.00 sec 18.2 GBytes 3.90 Gbits/sec receiver |
|
TetSensor Installed NPCAP Installed |
[ ID] Interval Transfer Bandwidth [ 4] 0.00-40.00 sec 17.3 GBytes 3.72 Gbits/sec sender [ 4] 0.00-40.00 sec 17.3 GBytes 3.72 Gbits/sec receiver |
Network Performance with NPCAP 0.9990
Compare the Network Performance after installing tetsensor, Client : Windows 2016
NPCAP 0.9990
TetSensor Config : Conversation Mode with Enforcement mode WFP
Server : Windows 2016
NPCAP 0.9990
TetSensor Config : Conversation Mode with Enforcement mode WFP
Run cmd : iperf3.exe -c <server_ip> -t 40 .. table:: Network Performance with NPCAP 0.9990
class longtable
|
Setup |
Network Performance |
|---|---|
|
TetSensor Installed NPCAP Installed |
[ ID] Interval Transfer Bandwidth [ 4] 0.00-40.00 sec 16.3 GBytes 3.50 Gbits/sec sender [ 4] 0.00-40.00 sec 16.3 GBytes 3.50 Gbits/sec receiver |
|
Performance may vary based on Windows NPCAP version installed, Windows OS, and network Configuration. |