Cisco
Login
Search
Software Secure Firewall Threat Defense
Platform Secure Firewall Threat Defense Virtual
Activity Onboard

VPN Remote Access VPN Advanced Secure Client Configurations Configure Secure Client Modules on a Firewall Threat Defense Configure a Remote Access VPN Group Policy with Secure Client Modules

Last updated: Jul 29, 2025

Configure a Remote Access VPN Group Policy with Secure Client Modules

To install and update the Secure Client modules on the endpoint using a Firewall Threat Defense managed by a Firewall Management Center, you must update the remote access VPN group policy with the Secure Client module configurations.

Before you begin

Ensure that you have configured a remote access VPN policy in the Firewall Management Center.

Procedure

1

Choose Devices > Remote Access.

2

Select a remote access VPN policy and click Edit.
3

Select a connection profile and click Edit.
4

Click Edit Group Policy.
5

Click the Secure Client tab.
6

Click Client Modules.
7

Click +.
8

Choose a module from the Client Module drop-down list.
9

Choose a profile for the module from the Profile to download drop-down list or click + to add a profile.
10

Check the Enable module download check box to download the module on the endpoint.
11

Click Add.
12

Repeat steps 7 to 11 if you want to add more modules.
13

Click Save.

What to do next

  1. Deploy the configuration on the threat defense.

  2. Launch the Secure Client, select the VPN profile, and connect to the VPN. Secure Client installs the configured modules on it.

  3. Verify the configuration. For more information, see Verify Secure Client Modules Configuration.

Previous topic Install Secure Client Modules using a Firewall Threat Defense Next topic Verify Secure Client Modules Configuration