Monitoring Syslog Messages for Alarms
Depending on the type of alarms you configure, you might see the following syslog messages.
- Dual Power Supply Alarms
-
-
%FTD-1-735005: Power Supply Unit Redundancy OK
-
%FTD-1-735006: Power Supply Unit Redundancy Lost
-
- Temperature Alarms
-
In these alarms, Celsius is replaced by the temperature detected on the device, in Celsius.
-
%FTD-6-806001: Primary alarm CPU temperature is High Celsius
-
%FTD-6-806002: Primary alarm for CPU high temperature is cleared
-
%FTD-6-806003: Primary alarm CPU temperature is Low Celsius
-
%FTD-6-806004: Primary alarm for CPU Low temperature is cleared
-
%FTD-6-806005: Secondary alarm CPU temperature is High Celsius
-
%FTD-6-806006: Secondary alarm for CPU high temperature is cleared
-
%FTD-6-806007: Secondary alarm CPU temperature is Low Celsius
-
%FTD-6-806008: Secondary alarm for CPU Low temperature is cleared
-
- Alarm Input Contact Alarms
-
In these alarms, description is the description for the contact that you configured.
-
%FTD-6-806009: Alarm asserted for ALARM_IN_1 alarm_1_description
-
%FTD-6-806010: Alarm cleared for ALARM_IN_1 alarm_1_description
-
%FTD-6-806011: Alarm asserted for ALARM_IN_2 alarm_2_description
-
%FTD-6-806012: Alarm cleared for ALARM_IN_2 alarm_2_description
-