Check for Historical NSEL Events
This procedure will filter for NSEL events that the Cisco Cloud has received within the time-frame you specify.
Procedure
1 |
In the Security Cloud Control platform menu, choose . |
2 |
In the left pane, choose . |
3 |
Click the Historical tab. |
4 |
Pin-open the event filter. |
5 |
In the ASA Events section, make sure NetFlow is checked. |
6 |
Set the Start time far enough back in time to check if Security Cloud Control ever did receive NSEL events. |
7 |
In the Sensor ID field, enter the IP address of the ASA you configured to send NSEL events. |
8 |
At the bottom of the filter, make sure that Include NetFlow events is checked. |